Hostel Shoppe - Vision VR40 Assembly Guidelines ... Page 4

Hostel Shoppe - Your Recumbent Bike, Tricycle, and Tandem Headquarters

Order Hostel Shoppe's 2004 Recumbent Catalog

Hostel Shoppe's FREE Recumbent Classified Ads

Tech Tips, Recumbent Info, and Expert Advice

Store Policies, Ordering Info and all about US

< Previous ] [ Next >
[1] [2] [3] [4]

Vision VR40 Assembly Guidelines ... Page 4

Pull the brake cable and push the brake arms together until there is approximately 2-3mm of space between each brake pad and the rim. Tighten the cable pinch bolt with a 5mm allen wrench as shown. Squeeze the brake lever several times and check for pad alignment. Once again, before making any adjustments, double check the wheel alignment in the fork.

Unwrap the chain and route it over the rear guide, through the front derailleur cage, and over the small chainring as shown.

Bring the chain around the small chainring and back through the forward idlers as shown. Be sure to follow the pattern in the picture, or the automatic size adjustment will not work. Route the return chain through the rear idler wheel towards the rear derailleur.

Bring the upper chain over the smallest rear cog and through the rear derailleur as shown. Be sure to route the chain through the derailleur cage and guide tabs as illustrated in the picture.

Thanks to the new Vision chain adjustment system, you should not need to shorten or lengthen the chain, only re-join the links with a chain tool. After the chain is installed, check your front and rear derailleur adjustment to ensure smooth shifting and install your seat.
(See the Vision Owner's Manual for seat installation instructions or refer to our Vision Seat Assembly help guide.)

Okay - what are you waiting for? Go Ride!

< Previous ] [ Next >
[1] [2] [3] [4]

Vision VR40 Assembly Guidelines ... Page 4
	Pull the brake cable and push the brake arms together until there is approximately 2-3mm of space between each brake pad and the rim. Tighten the cable pinch bolt with a 5mm allen wrench as shown. Squeeze the brake lever several times and check for pad alignment. Once again, before making any adjustments, double check the wheel alignment in the fork.
	Unwrap the chain and route it over the rear guide, through the front derailleur cage, and over the small chainring as shown.
	Bring the chain around the small chainring and back through the forward idlers as shown. Be sure to follow the pattern in the picture, or the automatic size adjustment will not work. Route the return chain through the rear idler wheel towards the rear derailleur.
	Bring the upper chain over the smallest rear cog and through the rear derailleur as shown. Be sure to route the chain through the derailleur cage and guide tabs as illustrated in the picture.
	Thanks to the new Vision chain adjustment system, you should not need to shorten or lengthen the chain, only re-join the links with a chain tool. After the chain is installed, check your front and rear derailleur adjustment to ensure smooth shifting and install your seat. (See the Vision Owner's Manual for seat installation instructions or refer to our Vision Seat Assembly help guide.)
Okay - what are you waiting for? Go Ride!